Products

DESIGNED TO DELIVER THE INVENTORY YOU NEED

Product > Electrical > Harness Management > Tubing Products > WX Series Expandable Sleeving > WX100 Expandable Braided Sleeve > Product # WX100-1/8

Print Page

WX100 Expandable Braided Sleeve

WX100 is an expandable braided sleeve used on cable assemblies, wire harnesses and hoses. It is made from tough, abrasion resistant, polyester monofilament fibers that are resistant to most solvents and hydrocarbons, such as jet fuels, gasoline, diesel fuels, hydraulic fluids and cleaning fluids. The open weave design not only allows it to be extremely flexible but also allows for complete drainage thus preventing moisture and mildew buildup. WX100 is an excellent choice anywhere abrasion protection and low cost wire bundling is required.

Product #: WX100-1/8

Specifications

Approvals	UL & CSA Rated
Standard Colors	Black White
Operating Temperature	-94 to 25 ºF -70 to 125 ºC
Nom. Monofilament Diameter	0.010 in
Nom. Wall Thickness	0.025 in
Nom. Inner Diameter	1/8 in
Size Range	3/32 to 1/4 in
Weight	1.70 lb/1000 ft.
Standard Spool Qty.	1000 ft

Industries

Note	Automotive Marine MotorSport Racing Military Industrial Entertainment Electronic

Applications

Note	Wire Harnesses Cable Protection Robotics Tube & Hose Protection Flat Ribbon Covering Cosmetic Covering CAD/CAM Equipment Engine Harnesses

Options

Color Options	Black Blue Clear Gray Green Neon Blue Neon Red Neon Yellow Orange Pink Red Violet White Yellow Yellow/Green
Construction Options	Fray Stop (FS) - Fray Stop is a special construction offered in WX100 and WX150. This fray resistant construction helps eliminate fraying of cut ends, which in turn makes hot knife cutting and its associated hazards unnecessary. Waste associated with ends unraveling due to handling is also greatly reduced. Heavy Duty (HD) - Heavy Duty is available in WX100 only. This braid is constructed from monofilament with a larger diameter (0.015"), providing up to twice the abrasion and impact protection as the standard weaves. Cut through resistance is greatly improved with very little change in flexibility. Heavy Duty weave is a great chose anywhere extreme abrasion and durability are of the highest concern. Tight Weave (TW) - Tight Weave is available in WX100, WX200, and WX300. Each type with Tight Weave construction offers all of the properties of the standard product, except that coverage and density have been significantly increased at the expense of flexibility. Tight Weave should be considered where snag-resistance, coverage protection and cosmetics are critical.

Color Options

Black
Blue
Clear
Gray
Green
Neon Blue
Neon Red
Neon Yellow
Orange
Pink
Red
Violet
White
Yellow
Yellow/Green

Construction Options

Fray Stop (FS) - Fray Stop is a special construction offered in WX100 and WX150. This fray resistant construction helps eliminate fraying of cut ends, which in turn makes hot knife cutting and its associated hazards unnecessary. Waste associated with ends unraveling due to handling is also greatly reduced. Heavy Duty (HD) - Heavy Duty is available in WX100 only. This braid is constructed from monofilament with a larger diameter (0.015"), providing up to twice the abrasion and impact protection as the standard weaves. Cut through resistance is greatly improved with very little change in flexibility. Heavy Duty weave is a great chose anywhere extreme abrasion and durability are of the highest concern. Tight Weave (TW) - Tight Weave is available in WX100, WX200, and WX300. Each type with Tight Weave construction offers all of the properties of the standard product, except that coverage and density have been significantly increased at the expense of flexibility. Tight Weave should be considered where snag-resistance, coverage protection and cosmetics are critical.

	FDH Electronics
	Shipping Address: 3601 N I-35 Service Road Oklahoma City, OK 73111	Billing Address: PO Box 11456 Oklahoma City, OK 73136	Toll Free: 800. 324.6591 Phone: 405.427.6591 Fax: 405.424.0056 ok.sales@electroenterprises.com

FDH Electronics