Acufast Aircraft Products Distributor
FDH Aero is a distributor of Acufast Aircraft Products, supplying externally threaded bolts, pins, and studs to aerospace, defense, and MRO buyers sourcing this brand by name. If a print or program specifically calls out Acufast hardware, this page is where to start a quote and confirm availability.
About Acufast Aircraft Products
Acufast Aircraft Products Inc. manufactures externally threaded fasteners, including bolts, pins, and studs, built for aircraft and aerospace assembly. These are the parts holding structures, components, and systems together under vibration, temperature swings, and load cycles that ground equipment rarely sees, which is why sourcing from a supplier with a documented aerospace manufacturing history matters as much as the part number itself.
FDH Aero carries the Acufast line as part of its broader hardware catalog, so a purchasing or engineering team sourcing this brand can order it alongside the rest of a fastener list rather than managing a separate vendor relationship for one product line.
Acufast Aircraft Products Available Through FDH Aero
Bolts
Acufast aircraft bolts are the externally threaded fastener most commonly called out on structural and assembly attach points, mating with a nut or a tapped hole and installed to a controlled torque. They’re the part of the Acufast line buyers most often search for by name, and the one FDH Aero fields the most quote requests on.
Pins
Pins handle alignment and shear-load applications where a design needs components positioned precisely and held against lateral movement rather than clamped under tension. Acufast pins are sized to fit the same aerospace assembly tolerances as the rest of the line.
Studs
Studs give a design a permanent, fixed threaded point in a parent material that can’t otherwise support one, without adding a separate nut plate. They’re a common fit anywhere an assembly needs a stud location that stays put through repeated maintenance cycles.
Sourcing Acufast Fasteners Through FDH Aero
FDH Aero has supplied C-class aerospace and defense components for more than 60 years, with over 650,000 square feet of inventory space and operations across 15 countries. That footprint is what sourcing Acufast Aircraft Products through FDH Aero actually buys a program:
- Single-source consolidation: order Acufast bolts, pins, and studs alongside other hardware lines instead of managing a separate supplier relationship
- VMI-ready: programs already running vendor-managed inventory with FDH Aero can add Acufast parts to that same replenishment setup
- Documentation on request: certifications of conformance and traceability paperwork are available for aerospace hardware orders where applicable
- Global reach, local support: the same 15-country footprint and local decision-making that backs the rest of FDH Aero’s hardware catalog applies to Acufast orders
Request Acufast Aircraft Products Parts from FDH Aero
FDH Aero distributes Acufast Aircraft Products bolts, pins, and studs and supports orders from single-part quotes through program-level quantities. Browse the FDH Hardware division page for the broader hardware and fastener lines carried alongside Acufast, or see the complete list of manufacturers FDH Aero distributes for if you’re sourcing parts beyond this brand.
Request a quote for Acufast Aircraft Products bolts, pins, and studs, or contact FDH Aero’s team if you need help matching a part number to your specification.
FAQs
What’s the difference between externally threaded and internally threaded aircraft fasteners?
Externally threaded fasteners, such as bolts, pins, and studs, have threads cut into an outer shaft and pair with an internally threaded part like a nut or a tapped hole. Acufast Aircraft Products specializes in this externally threaded category, which is what most aircraft structural and assembly fastening relies on.
What’s the difference between a bolt, a pin, and a stud in aerospace fastening?
A bolt is designed to be removable and is torqued into a nut or tapped hole to clamp parts under tension. A pin is used mainly for alignment and shear load, holding components in a fixed position rather than clamping them. A stud provides a permanent threaded point in a material that can’t support a bolt on its own, without needing a separate nut plate.
Does FDH Aero provide certifications of conformance with Acufast orders?
FDH Aero can supply certifications of conformance and material traceability documentation for Acufast Aircraft Products parts as required by your purchase order. Confirm your documentation requirements when you request a quote.
What’s the lead time on Acufast Aircraft Products parts through FDH Aero?
Lead time depends on the specific part number and order quantity. Contact FDH Aero with your part numbers and quantities for current availability and lead time.
