Products

DESIGNED TO DELIVER THE INVENTORY YOU NEED

Product > Electrical > Harness Management > Heatshrink Shapes > Low Profile Right Angle Heatshrink Shapes > 1100 Series Right Angle Heatshrink Shapes with Rib (VG/MIL Style) > Product # 1127-1-H

Print Page

1100 Series Right Angle Heatshrink Shapes with Rib (VG/MIL Style)

Right Angle Low Profile Shapes With Rib VG/MIL-StyleThis style is typically used on airborne harness to achieve low profile, compact strain relief and mechanical protection.VG shapes according to T07 add ‘P’ after Hellermann part number.Dimensions apply to all materials unless otherwise indicated and are in inches.PLEASE NOTE: When ordering parts with L material, the modification # changes, due to expansion detail changes. Please consult main office for correct call-out.

Product #: 1127-1-H

Specifications

Style	VG
VG Part No.	VG 95343 T 06F 007
Expanded (Min) H	1.97
Expanded (Min) J	1.97
Recovered (Max) H	1.63
Recovered (Max) J	0.57
Material	Flexible Zero-Hal Limited Fire Hazard Material
Specification	NAVSEA 5617649
Adhesive Options	1 Part Epoxy 200ºC General Purpose Hot Melt +80ºC High Performance Hot Melt +105ºC None

Recovered Dimensions Fully Shrunk

P ±10%	5.20
R ±10%	1.18
T ±10%	0.07
HW ±20%	0.09
JW ±30%	0.06

Application

Applications	Heat shrinkable molded shapes combine the advantages of quick, easy installation, with high electrical strength, mechanical toughness and superior chemical & environmental resistance. These products offer important functional and cost saving benefits for electrical and electronic applications ranging from insulation & protection of individual components to fabrication of complete inter-connecting cable harness assemblies. The use of our heat shrink molded shapes in conjunction with our specialized heat shrink tubing products make it easy to fabricate completely sealed wire/cable harnessing & inter-connection systems of the highest quality. Heat shrink shapes are available with a wide range of high performance adhesives/encapsulates to ensure the proper amount of strain relief, mechanical support and environmental protection.

Applications

Heat shrinkable molded shapes combine the advantages of quick, easy installation, with high electrical strength, mechanical toughness and superior chemical & environmental resistance. These products offer important functional and cost saving benefits for electrical and electronic applications ranging from insulation & protection of individual components to fabrication of complete inter-connecting cable harness assemblies.

The use of our heat shrink molded shapes in conjunction with our specialized heat shrink tubing products make it easy to fabricate completely sealed wire/cable harnessing & inter-connection systems of the highest quality. Heat shrink shapes are available with a wide range of high performance adhesives/encapsulates to ensure the proper amount of strain relief, mechanical support and environmental protection.

Technical Capabilities

Note	Besides our abilities to make custom parts and compounds, we have a full service support team that can assist you from concept to design and production. Allow use to use our considerable knowledge to make your requirements possible.

Inventory

Note	Our vast inventory includes three stocking locations of standard products. Off the shelf products include many different compound types and pre-installed adhesives. Because of our supplier partnering relationships, we are able to carry and manage any special inventory items you may need.

	FDH Electronics
	Shipping Address: 3601 N I-35 Service Road Oklahoma City, OK 73111	Billing Address: PO Box 11456 Oklahoma City, OK 73136	Toll Free: 800. 324.6591 Phone: 405.427.6591 Fax: 405.424.0056 ok.sales@electroenterprises.com

FDH Electronics